2020

  • 3 Reasons to Buy Ground Spur Gears

    If you need to buy spur gears, then you have to decide on a manufacturing method. For example, some gears are machined or cut to shape and some are ground. In some cases, ground gears are the best option. Why? 1. Get a Better Tooth Finish Machining and cutting processes do create precise gears with teeth in the right places and configurations. However, these manufacturing methods aren't always completely precise.
    [Read More]

  • 3 Reasons to Use a Jackhammer Trolley When Removing Tiles

    While a jackhammer makes tile removal easier and quicker, the extra power you get from this tool doesn't always work as well you hoped. In some cases, you'll clear tiles and light surface materials from floors more effectively if you attach your jackhammer to a trolley. Here, the jackhammer slots into a lightweight trolley casing with wheels and a handle. The hammer still does the work on the floor, but the trolley adds extra benefits.
    [Read More]

  • Why Use Formwork Tubes When Your Pour Concrete Columns?

    Creating concrete columns on a build can be a tricky and time-consuming process. In some cases, you can use pre-made formwork tubes to do this job. How do these tubes work and what are the advantages of using them? How Do Formwork Column Tubes Work? Formwork tubes are usually made from a strong and rigid cardboard. They have plastic or oiled linings inside; their exteriors have a water-resistant coating. You use these tubes to create columns below or above ground.
    [Read More]

  • Four Planning Precautions for Installing Screw Piling

    If you are preparing for construction, you should consider using screw piles for your foundation. Screw piles are highly versatile and can be used for both commercial and residential structures. These elements are beneficial because they do not require curing. Therefore, the construction process will be fast. Other benefits include minimal vibration and rapid mobilisation. Here are some simple tips to help you plan for the installation of screw piling.
    [Read More]

  • Top Benefits of Customised HVAC Ducts

    Sheet metal is one of the most common materials used in air conditioning ducts. Not only are they durable, but metallic AC ducts are also easy to install, according to HVAC technicians. Besides, the rigidity of sheet metal allows air to move through the ductwork without creating too much turbulence and noise. However, it is essential to use sheet metal HVAC fabrication to make custom ducts as opposed to buying generic metal ducts.
    [Read More]

  • Three Steps for Building a Simple Acrylic Glass Box

    If you are interested in acquiring display cases, you should opt for acrylic glass products. Acrylic glass is more favourable than traditional glass because it is shatterproof. It will not break into shards under mechanical stress. This property makes it perfect for use in high-traffic areas like shops. In addition, this material is transparent and highly durable. You can purchase display boxes from a specialist dealer if you are looking for a standard case.
    [Read More]

  • Understanding Laser Cutting

    Laser cutting is a process of focusing a laser beam on a material surface to either engrave an image, words or patterns on it or cut into the material to get the desired shape or cut out. Here's what you need to know about laser cutting: The Meaning of the Word Laser LASER stands for Light Amplification through Stimulated Emission of Radiation. This radiation can heat, melt and vaporise materials; since it can be channelled and controlled, laser cutting is made possible.
    [Read More]

  • Principle Considerations Before Having A Custom Industrial Shed Installed

    If you have been running your industrial operations without a custom shed, you have likely realised how going without this structure has cost you more than investing in it would have. Without your storage facility, you end up having to either outsource warehousing for your manufactured products or let them take up valuable floor space, which in turn can negatively affect your daily operations. With that said, it is never too late to have this structure constructed for your industrial applications.
    [Read More]

  • Major Problems Faced When Laser Cutting Steel

    A practical and cost-efficient way to fabricate metals is through laser cutting. Laser machines are distinct from others in their application and design. For instance, laser cutters never make contact with the material. They tend to use high-energy power sources and tighter cutting tolerances. Also, for maximum precision, these devices are automated. The laser is useful in cutting various grades of steel. Though the method offers numerous benefits, you may face some challenges when using a laser cutter.
    [Read More]

  • HVAC Piping: Reasons for Using PVC Pipes in Your Hybrid HVAC System

    Heating your home is crucial to your comfort. Installing a hybrid HVAC system will ensure that your house is at a comfortable temperature even when it is freezing outside. You can buy high-quality HVAC piping at your local hardware store. Here are three reasons why you should use PVC piping in your HVAC system.   Corrosion-resistant  PVC piping is corrosion-resistant, while metallic pipes are prone to rust and corrosion. If one pipe gets corroded, the corrosion is bound to spread to all the pipes in the system.
    [Read More]