Three Steps for Building a Simple Acrylic Glass Box
Posted on: 17 March 2020
If you are interested in acquiring display cases, you should opt for acrylic glass products. Acrylic glass is more favourable than traditional glass because it is shatterproof. It will not break into shards under mechanical stress. This property makes it perfect for use in high-traffic areas like shops. In addition, this material is transparent and highly durable. You can purchase display boxes from a specialist dealer if you are looking for a standard case. However, if you are interested in a custom product, you can create your own using sheet materials. Here are simple tips on using acrylic glass to build display cases.
Choose Acrylic Sheets
You will need to purchase suitable acrylic glass for your project. Your choice of sheets will determine the integrity and durability of the display box. When selecting the materials for the work, you should think about the optimal thickness of the case. If you would like a strong and durable case, opt for thick sheets. These will be able to withstand pressure. However, it is not always necessary to choose the thickest available acrylic. If the display case will not be touched or otherwise handled constantly, you can opt for thinner sheets.
Purchase Other Supplies
It is important to acquire the other supplies needed for building the display case before beginning the project. This will eliminate the need to suspend the project midway to look for the required products. If you are creating a simple box, you will need a fine tooth saw and clamps for cutting the material. Acrylic glue like methylene chloride is also indispensable, regardless of the case design. If you are a complete crafts beginner, consider making a simple box with one open side and placing it over a wooden surface. If you are a little more familiar with DIY projects, you can make a door with a drill and basic hinges. Additionally, it is advisable to have fine-grit sandpaper for smoothing rough edges.
Cut and Glue the Sheets
Measure the acrylic glass sheets and mark the dimensions desired. Clamp the materials to your worktable and cut the pieces using the saw. Clamping will prevent the sheet from moving and resulting in rough edges. Then, use your glue to join the pieces in the desired configuration. When applying the glue, make sure to use enough to secure the sheets together. However, do not allow it to smear over the display areas. Remember to hold the acrylic units together until there is significant setting before allowing them to dry.
Contact a supplier of products like Perspex boxes for more information.
Share